Quotation / Order Confirmation Notes
With material coated 15 µm thick and with RSL, colour uniformity cannot be guaranteed. If the colour RSL is chosen, it is up to Fischer Profil to decide which material / colour to use.
2. Metallic Colours
With metallic colours such as RAL 9006, 9007 or similar, there is no guarantee of colour uniformity; the paint on the reverse side may be marked with arrows.
3. White rust
Galvanised profiles can form white rust and profiles with 55% AL zinc coating may show blackening. Fischer Profil can accept no liability for these corrosion phenomena in case of improper storage.
4. Condens stop
FischerTRAPEZ with condensation stop must be transported and stored completely dry.
5. II A-Material
When II A-material leaves the warehouse, it is deemed to have been delivered in accordance with the conditions and can therefore not be the subject of complaint.
Obvious defects can only be acknowledged if they were noted on the shipping documents when the material was accepted. We reserve the right to bring rejected material back to our factory in order to examine whether rejection was justified.
7. Adjustment of deadlines for quantities of less then 300 m²
For quantities of FischerTRAPEZ profiles below 300m², the specified delivery week may be postponed if there are no further orders for the same product type.
8. Adjustment of deadlines for quantities of less then 80 m²
For quantities of FischerTHERM elements below 80m², the specified delivery week may be postponed if there are no further orders for the same product type.
9. Pre-reservations of standard material
In order to guarantee the production date, the specification for FischerTHERM elements must be received by our company at least 8 weeks and for FischerTRAPEZ profiles at least 5 weeks before the confirmed delivery date.
10. Uneven sandwich elements
In the production of flat sandwich elements, visible unevenness cannot be ruled out completely. This is the current state of technology and does not constitute a reason for complaint.
11. Regulation / Terms of contract / Purchase obligation
Pre-reservation / Global order
A pre-reservation / global order is binding. The quantities to which the conditions (price, delivery time, etc.) refer are +/- 10% of the total quantity specified in the pre-reservation / global order for standard material, and +0/-5% for special material purchases. During the planning phase, please also take into account any flat sheet metal and shaped parts that may be required. There is a purchase obligation on the part of the customer. In the event of discrepancies in the total quantity purchased, this has consequences for prices and delivery dates. Quantity excess: In the event of quantities exceeding the quantity ordered, the price for the re-order must be renegotiated. Slight colour discrepancies due to a different batch of input material must also be accepted. The delivery date must be renegotiated. Quantity reduction: In the event of a reduced purchase quantity, the customer shall be invoiced for the remaining quantity. Postponements are only possible by mutual arrangement but will result in price adjustments. For each order called, a preliminary run is necessary for production and planning reasons. The specified parts list deadline must be adhered to for punctual delivery.
Furthermore, the General Terms and Conditions of Sale and Delivery of Fischer Profil GmbH shall apply. In order to guarantee the production date, the specification for FischerTHERM elements must be received by our company at least 6 weeks and for FischerTRAPEZ profiles at least 3 weeks before the confirmed delivery date.
Fischer Profil GmbH
Tel: +49 (0) 27 37 – 5 08 – 0