FischerTHERM® D 100
Roof sandwich panel with a thickness of 100mm
(Kernstärke 60 mm)
Das trapezprofilierte und wärmegedämmte Dachelement FischerTHERM® D 100 wird montagefertig geliefert und überzeugt durch sein geringes Gewicht von 11,7 kg/m2. The maximum available length is 26.4 meters, the construction width of the elements is 1,000 mm. FischerTHERM® D 100 hat einen Wärmedurchgangskoeffizienten (U-Wert) von 0,355 W/(m2K) and combines an attractive design with high thermal efficiency.
The thermal properties of the roof element can be further improved by specifying our factory-fitted DUO gasket, this enables additional energy savings of up to 10%.
FischerTHERM® roof sandwich panels for industrial and commercial construction consist of an external and internal pre-finished steel skin, with a core of rigid polyurethane foam. This core is CFC and HCFC free and therefore not harmful to the ozone layer.
Depending on the building application and desired thermal insulation, a thickness of 70 to 180 mm (core depths from 30 to 140 mm) can be selected. The panels are 1,000mm wide and the maximum available length is 26.4 metres.
While the external skin is trapezoidally profiled, we offer the choice of either "lined" or "flat" profiles for the inner skin.
FischerTHERM® roof panels are quick and easy to install and their large longitudinal joint overlap provides an optimum seal against the penetration of surface water. Fine auxiliary drilling grooves help to prevent the drill from slipping and thus prevent possible damage to the coating. For hidden sealing screws the FischerTHERM®
The low weight of the prefabricated FischerTHERM® roof panels combined with very high rigidity allows large spans to be achieved. This results in a number of advantages, including short construction times, simple and quick assembly and easy dismantling with subsequent reusability.
Mounting systems for solar and photovoltaic systems can also be installed as load-bearing elements on FischerTHERM® roofs.
All FischerTHERM® roof elements have excellent thermal insulation and airtightness. The optional DUO seal is installed at the factory and enables additional energy savings of up to 10%. The calculated joint permeability coefficient (a-value) exceeds the set value prescribed in the DIN standards by x100.
The coating variants offered for FischerTHERM® roof elements combine sophisticated aesthetics with high corrosion protection. You can choose between the premium pre-finished steel - Colorcoat HPS200 Ultra® and Colorcoat Prisma® - which both offer a wide colour choice, all with excellent UV protection. Fischer Profil offers the Confidex® Guarantee on both products with a lifetime of up to 40 years.
We also supply FischerFIREPROOF® MW roof sandwich panels with a mineral wool core, which along with our FischerTHERM® roof PIR sandwich panels are available FM Approvals® certification.
For further information about our products please contact: info@fischerprofil.de
Product name | Sheet thickness [mm] | Panel thickness [mm] | Recommended max. length [m] | Weight [kg/m²] | Heat transfer coefficient according to DIN EN 14509 [W/(m2K)] | Total thermal resistance Rtot according to DIN EN 6949 (without joint) [(m²K)/W] | ||
---|---|---|---|---|---|---|---|---|
Outer skin | Inner skin | Ud,s Simplified procedure with fjoint | Un,s (without joint) | |||||
FischerTHERM® D 70 | 0,55 | 0,45 | 70 | 26,4 | 10,5 | 0,698 | 0,661 | 1,513 |
FischerTHERM® D 80 | 0,55 | 0,45 | 80 | 26,4 | 10,9 | 0,536 | 0,513 | 1,948 |
FischerTHERM® D 100 | 0,55 | 0,45 | 100 | 26,4 | 11,7 | 0,366 | 0,355 | 2,818 |
FischerTHERM® D 120 | 0,55 | 0,45 | 120 | 26,4 | 12,5 | 0,278 | 0,271 | 3,687 |
FischerTHERM® D 140 | 0,55 | 0,45 | 140 | 26,4 | 13,4 | 0,224 | 0,219 | 4,557 |
FischerTHERM® D 160 | 0,55 | 0,50 | 160 | 26,4 | 13,9 | 0,188 | 0,184 | 5,427 |
FischerTHERM® D 180 | 0,55 | 0,50 | 180 | 26,4 | 15,1 | 0,162 | 0,159 | 6,296 |
Here you will find product-specific information to assist you during the selection or installation process:
For product related downloads click here
Product portfolio FischerTHERM plusdach > Download
Accessoires brochure: Bent profiles and accessories > Download
Zulassung: FischerTHERM > Download
Swiss Fire Protection Certificate: Roof elements and sub-roofs > Download
Load table: FischerTHERM > Download
Ausschreibungstext: FischerTHERM Dachelemente > Download
Certificate of Compliance:: Load-bearing sandwich elements > Download
Certificate ISO 9001:2015 – Herstellung und Vertrieb > Download
You can find more downloads here.
Technical information and mounting instructions can be found here.
If you need more information, please contact our technical team: mailto:info@fischerprofil.de
Please complete the below form and we will get back to you as soon as possible:
Standardfarben der FischerTHERM Dachelemente
Wir bei Fischer Profil bieten unseren Kunden eine breite Palette an Standardfarben für unsere Produkte. Je nach Produkt und Blechdicke haben wir verschiedene Optionen zur Auswahl. Um die genauen Farben unserer FischerTHERM Dachelemente zu erfahren, werfen Sie bitte einen Blick auf die untenstehende Tabelle und die entsprechenden Produktinformationen.
Unsere Standardfarben wurden sorgfältig ausgewählt, um den individuellen Anforderungen unserer Kunden gerecht zu werden. Wir legen großen Wert auf Qualität und Ästhetik, daher können Sie sich darauf verlassen, dass unsere Farbauswahl Ihren Erwartungen entspricht.
Egal ob es um Dach- und Wandverkleidungen, Fassadenelemente oder andere Produkte geht – wir bieten Ihnen eine Vielzahl von Farboptionen, um sicherzustellen, dass Ihr Projekt den gewünschten visuellen Effekt erzielt.
Declarations of performance
Declarations of performance are very important when providing specifiers with confirmation of European Standards in relation to the products they have used for their building. We provide a full library of DoPs in relation to our product which you can request here.
Contact us
Fischer Profil GmbH
Waldstraße 67
57250 Netphen-Deuz
Germany
Tel: +49 (0) 27 37 – 5 08 – 0
mailto:info@fischerprofil.de