FischerTHERM® plus wall sandwich panels are ideal for industrial and commercial buildings. They consist of an external and internal pre-finished steel skin and a core of rigid PIR polyurethane foam. This is free of CFC and HCFC and therefore not harmful to the ozone layer. The geometry of the FischerTHERM® Plus joint conceals the fixing points, this secret fix construction improves the aesthetics and offers even more protection against precipitation and condensation water. Depending on the cladding area and the desired thermal insulation, a panel thickness of 60 to 140mm can be selected. The as-built panel width is 1,000mm and the recommended maximum length is 16m. FischerTHERM® plus offers a wide range of design options with various surface textures (micro-ribbed, combination lining, etc.) so there are virtually no limits to creative façade design.

FischerTHERM® plus has excellent thermal insulation and airtightness. The optional DUO seal is installed at the factory and enables additional energy savings of up to 10%. The calculated joint permeability coefficient (a-value) even exceeds the set value prescribed in the DIN standards by a hundred times.

Wall sandwich panel with a thickness of 60mm

The thermally insulated secret fix wall panel FischerTHERM® plus 60 has a heat transfer coefficient (U-value) of only 0.408W/(m2K) .

Wall sandwich panel with a thickness of 80mm

The thermally insulated secret fix wall panel FischerTHERM® plus 80 has a heat transfer coefficient (U-value) of only 0.297W/(m2K).

Wall sandwich panel with a thickness of 100mm

The thermally insulated secret fix wall panel FischerTHERM® plus 100 has a heat transfer coefficient (U-value) of only 0.235W/(m2K).

Wall sandwich panel with a thickness of 120mm

The thermally insulated secret fix wall panel FischerTHERM® plus 120 has a heat transfer coefficient (U-value) of only 0.195W/(m2K).

Wall sandwich panel with a thickness of 140mm

The thermally insulated secret fix wall panel FischerTHERM® plus 140 has a heat transfer coefficient (U-value) of only 0.167W/(m2K).

Declarations of performance

Declarations of performance are very important when providing specifiers with confirmation of European Standards in relation to the products they have used for their building. We provide a full library of DoPs in relation to our product which you can request here.

Contact Us

    Your country of origin
    GermanyOther country

    Your zip code (if Germany)

    Latest Projects

    Latest News

    See all news
    Contact us

    Fischer Profil GmbH
    Waldstraße 67
    D-57250 Netphen-Deuz
    Tel: +49 (0) 27 37 – 5 08 – 0
    info@tatasteeleurope.com

    Follow us