FischerWELLE (Stahl)

FischerWELLE® für Industrie- und Gewerbebau besteht aus verzinktem, kunststoffbeschichteten Stahlfeinblech und eignet sich für den Bau von Dach und Wand. WELL-Profile können für einschalige sowie mehrschalige Dächer eingesetzt werden. Bei der Montage an der Wand können die Elemente senkrecht oder waagerecht montiert werden. Je nach Anwendungsbereich kann eine Blechdicke zwischen 0,70 und 1,25 mm gewählt werden. Die maximal verfügbare Länge der Bauelemente beträgt 12 Meter.

Alternativ zu den WELL-Profilen aus Stahl finden Sie here die gewellten Profile FischerWELLE aus Aluminiumblech.

Für die Montage von FischerWELLE gelten die „IFBS-Fachregeln des Metallleichtbaus“.

FischerWELLE 18/988 Stahl

WELL profile for roofs and walls with a height of 18mm and a width of 988mm

Depending on the application, a sheet thickness between 0.70 and 1.25mm can be selected.
The maximum length is 12m.

FischerWELLE 18/1064 Stahl

WELL profile for roofs and walls with a height of 18mm and a width of 1064mm

Depending on the application, a sheet thickness between 0.70 and 1.25mm can be selected.
The maximum length is 12m.

FischerWELLE 27/1000 Stahl

WELL profile for roofs and walls with a height of 27mm and a width of 1000mm

Depending on the application, a sheet thickness between 0.70 and 1.25mm can be selected.
The maximum length is 12m.

FischerWELLE 42/960 Stahl

WELL profile for roofs and walls with a height of 42mm and a width of 960mm

Depending on the application, a sheet thickness between 0.70 and 1.25mm can be selected.
The maximum length is 12m.

Declarations of performance

Declarations of performance are very important when providing specifiers with confirmation of European Standards in relation to the products they have used for their building. We provide a full library of DoPs in relation to our product which you can request here.