FischerTHERM® plus 120
Wall sandwich panel with a thickness of 120mm
Das wärmegedämmte Wandelement FischerTHERM® plus 120 wird verdeckt befestigt. Die empfohlene maximale Länge beträgt 16 Meter, die Baubreite der Elemente liegt bei 1.000 mm. Sonderbaubreiten sind auf Anfrage erhältlich.
FischerTHERM® plus 120 hat einen Wärmedurchgangskoeffizienten (U-Wert) von nur 0,195 W/(m2K) and combines attractive and versatile design with cost-effectiveness.
The thermal properties of the wall panel can be improve further by using our optional DUO seal gasket which is installed at the factory. It enables additional energy savings of up to 10%.
Die Wandelemente FischerTHERM® plus für den Industrie- und Gewerbebau bestehen aus zwei Deckschichten aus oberflächenbeschichtetem Stahl sowie einem dazwischenliegenden Kern aus Polyurethan-Hartschaum. Dieser ist FCKW- und HFCKW-frei und somit nicht ozonschichtschädigend.
The geometry of the FischerTHERM® plus joint conceals the fixing points, this secret fix construction improves the aesthetics and offers even more protection against precipitation and condensation water.
Depending on the cladding area and desired thermal insulation, the range includes thickness from 60 to 140mm. The as-built panel width is 1100mm and the maximum available length is either 12 or 16m, depending on the thickness used. Special construction widths are available on request.
FischerTHERM® plus bietet ein breites Gestaltungsspektrum mit verschiedenen Oberflächenstrukturierungen (Mikrolinierung, Kombilinierung etc.) – der kreativen Fassadengestaltung sind also kaum Grenzen gesetzt. Die Elementfuge dagegen ist einheitlich passend und erlaubt so eine vielfältige Kombination der unterschiedlichen Oberflächenstrukturierungen, mit dem Ziel, maßgeschneiderte Lösungen zu schaffen.
Die Produktreihe FischerTHERM® plus verfügt über eine hervorragende Wärmedämmung und Luftdichtheit. Die optionale DUO-Dichtung wird werkseitig verbaut und ermöglicht zusätzliche Energieeinsparungen von bis zu 10 Prozent. Der ermittelte Fugendurchlasskoeffizient (a-Wert) übertrifft den in den DIN-Normen vorgeschriebenen Sollwert sogar um das Hundertfache.
Die angebotenen Beschichtungsvarianten für FischerTHERM® plus verbinden eine anspruchsvolle Ästhetik mit einem hohen Korrosionsschutz. Ausgewählt werden kann zwischen den Premiumbeschichtungen Colorcoat HPS200 Ultra® und Colorcoat Prisma® sowie einem breiten Spektrum verfügbarer Farbtöne mit exzellentem UV-Schutz. Auf beide Premiumbeschichtungen gewährt Fischer Profil die Confidex® Garantie mit einer Laufzeit von bis zu 40 Jahren.
Nach der Einführung der FischerFIREPROOF® MW Sandwichelemente mit Mineralfaserkern haben nun auch die Elemente mit einem Kern aus Polyurethan-Hartschaum, darunter FischerTHERM® plus FA in den Elementdicken 60, 80, 100, 120 und 140 mm, das Zertifikat von FM Approvals® erhalten.
For further information about our products please contact: info@fischerprofil.de
Product name | Sheet thickness [mm] | Panel thickness [mm] | recommended max. length [m] | Panel weight [kg/m2] | Heat transfer coefficient according to DIN EN 14509 [W/(m2K)] | Total thermal resistance Rtot according to DIN EN 6949 (without joint) [(m²K)/W] | ||
---|---|---|---|---|---|---|---|---|
Outer skin | Inner skin | Ud,s Precise method with FEM according to DIN EN ISO 10211 |
Un,s (without joint) |
|||||
FischerTHERM® plus 60 | 0,63 | 0,50 | 60 | 16,0 | 12,7 | 0,408 | 0,366 | 2,731 |
FischerTHERM® plus 80 | 0,63 | 0,50 | 80 | 16,0 | 13,5 | 0,297 | 0,278 | 3,600 |
FischerTHERM® plus 100 | 0,63 | 0,50 | 100 | 16,0 | 14,3 | 0,235 | 0,224 | 4,470 |
FischerTHERM® plus 120 | 0,63 | 0,50 | 120 | 16,0 | 14,9 | 0,195 | 0,187 | 5,340 |
FischerTHERM® plus 140 | 0,63 | 0,50 | 140 | 16,0 | 15,7 | 0,167 | 0,161 | 6,209 |
Here you will find product-specific information to assist you during the selection or installation process:
For product related downloads click here
Product brochure Fischer DUO seal > Download
Accessoires brochure: Bent profiles and accessories > Download
Zulassung: FischerTHERM > Download
Swiss Fire Protection Certificate: Roof elements and sub-roofs > Download
Load table: FischerTHERM > Download
Certificate of Compliance:: Load-bearing sandwich elements > Download
Certificate ISO 9001:2015 – Herstellung und Vertrieb > Download
You can find more downloads here.
Technical information and mounting instructions can be found here.
If you need more information, please contact our technical team: mailto:info@fischerprofil.de
Please complete the below form and we will get back to you as soon as possible:
Standardfarben der FischerTherm plus Wandelemente
Wir bei Fischer Profil bieten unseren Kunden eine breite Palette an Standardfarben für unsere Produkte. Je nach Produkt und Blechdicke haben wir verschiedene Optionen zur Auswahl. Um die genauen Farben unsere FischerTHERM plus Wandelemente zu erfahren, werfen Sie bitte einen Blick auf die untenstehende Farbmusteransicht mit den entsprechenden Produktinformationen.
Unsere Standardfarben wurden sorgfältig ausgewählt, um den individuellen Anforderungen unserer Kunden gerecht zu werden. Wir legen großen Wert auf Qualität und Ästhetik, daher können Sie sich darauf verlassen, dass unsere Farbauswahl Ihren Erwartungen entspricht.
Egal ob es um Dach- und Wandverkleidungen, Fassadenelemente oder andere Produkte geht – wir bieten Ihnen eine Vielzahl von Farboptionen, um sicherzustellen, dass Ihr Projekt den gewünschten visuellen Effekt erzielt.
Declarations of performance
Declarations of performance are very important when providing specifiers with confirmation of European Standards in relation to the products they have used for their building. We provide a full library of DoPs in relation to our product which you can request here.
Contact us
Fischer Profil GmbH
Waldstraße 67
57250 Netphen-Deuz
Germany
Tel: +49 (0) 27 37 – 5 08 – 0
mailto:info@fischerprofil.de